Platforms and end-products
Productiecapaciteit voor defensieplatforms en eindproducten (EDIP).
EDIP-subsidie voor industriële versterking (lump sum, € 152,75 mln, maximaal € 30 mln per project, 35% met bonussen tot 50%) voor productiecapaciteit van defensieplatforms en eindproducten, zoals smeden en verspanen, subsystemen, composieten en assemblage.
Deze subsidiedatabase is in bèta
Tot de officiële lancering op 1 januari 2027 voeren we de laatste verbeteringen door. Onze redactie controleert elke regeling, maar gegevens kunnen nog onvolledig of verouderd zijn. Raadpleeg de officiële publicatie voordat je een aanvraag indient.
Wat is Platforms and end-products?
Opgebouwd uit de gegevens op deze pagina, zonder eigen toevoegingen.
Waarom bestaat deze regeling?
De Europese defensie-industrie in staat stellen sneller en meer defensieproducten te leveren.
Over de regeling
Samengesteld uit passages uit de bekendmaking van de regeling, zonder eigen toevoegingen.
Projects are expected to deliver results aligned with the expected results set out in this call topic and to evidence their contribution through dedicated KPIs defined in the proposal. Expected results include: - tangible capacity increases in EU-based production enabling the ramp-up of the targeted platforms or end-products, with demonstrated contribution to competitiveness; - improved resilience & geographical distribution of supply and industrial capability, reducing single points of failure across forging/machining, key sub-systems, composites and assembly/integration; - strengthened availability and security of supply of the targeted platforms or end-products with identified risks and exposure to the risk of materialisation of conventional military threats; - and measurable lead-time reductions, establishment or availability of reserved capacity where applicable, and workforce trained to operate and sustain the reinforced production lines (including, where relevant, MaaS and dual-use conversion pathways).
Voorwaarden
Letterlijk uit de regeling, met het artikel waarin de voorwaarde staat.
Wat krijg je?
35% van je subsidiabele projectkosten, met een maximum van € 30M per aanvraag.
Deadlines & cycli
Hoe vraag je aan?
- Aanvraagformulier deel A: administratieve gegevens van de deelnemers en samengevatte begroting (online in te vullen)
- Aanvraagformulier deel B: technische beschrijving van het project (max. 70 pagina's, niet-gerubriceerd en gerubriceerd deel samen)
- Gedetailleerde begrotingstabel (basis voor de lump sum)
- Informatie over de deelnemers (sleutelpersoneel en eerdere projecten of activiteiten)
- Lijst van infrastructuur, faciliteiten, middelen en voorzieningen
- Ownership control declarations (eigendoms- en zeggenschapsverklaringen), ook voor geassocieerde partners
- Inkoopstrategie (in verband met de subsidiabiliteitsvoorwaarden over de herkomst van de kosten van componenten)
Waar mag het aan besteed worden?
Bestanden & formulieren
Wat is er veranderd?
19 oktober 2026regeling · versie 4
Voorwaarden: 3 vervallen, 18 nieuwBekijkVerberg
Enkele aanvrager of consortium Enkele aanvragers of consortia van maximaal 15 juridische entiteiten; voor activiteiten onder artikel 12(1)(d) van de EDIP-verordening zonder SEAP minimaal 3 onafhankelijke entiteiten uit 2 lidstaten.
Gevestigd in EU of EDIP-geassocieerd land Aanvragers zijn juridische entiteiten gevestigd in een EU-lidstaat of geassocieerd land, niet gecontroleerd door niet-geassocieerde derde landen (calldocument sectie 6).
Beveiliging Gerubriceerde informatie en beveiligingsvoorschriften volgens het calldocument (sectie 6, Security).
In order to be eligible, the applicants (beneficiaries and affiliated entities) must: … be legal entities (public or private bodies)
In order to be eligible, the applicants (beneficiaries and affiliated entities) must: … be established in one of the eligible countries, i.e.: … EU Member States (including overseas countries and territories (OCTs)) … listed EEA countries and countries associated to the EDIP Programme (‘EDIP associated countries’; list of participating countries)
In order to be eligible, the applicants (beneficiaries and affiliated entities) must: … have their executive management structure established in eligible countries
In order to be eligible, the applicants (beneficiaries and affiliated entities) must: … not be subject to control by a non-associated third country or non-associated third-country entity (unless they are exempted under Article 9(9) of the EDIP Regulation or provide guarantees, including adequate mitigation measures pursuant to a FDI screening, approved by the EU Member State or EDIP associated country where they are established; see Annex 2).
Consortia must not exceed 15 legal entities.
Proposals that include activities within the meaning of Article 12(1)(d) of the EDIP Regulation and where no SEAP participates must be submitted by consortia that are composed of at least 3 independent entities from 2 different EU Member States (only beneficiaries count; not affiliated entities).
The following actions and activities are not considered as eligible for funding under this call: … projects that do not implement the objectives set out in Article 4 of the EDIP Regulation
The following actions and activities are not considered as eligible for funding under this call: … projects that concern defence products which are prohibited by applicable international law
The following actions and activities are not considered as eligible for funding under this call: … projects that concern lethal autonomous weapons that operate outside a responsible chain of human command and control or that cannot be used in compliance with international humanitarian law
The following actions and activities are not considered as eligible for funding under this call: … projects related to cluster munitions or anti-personnel mines
The following actions and activities are not considered as eligible for funding under this call: … projects (or parts thereof), that are already fully financed from other public or private sources
The following actions and activities are not considered as eligible for funding under this call: … projects completed before the signature of the grant agreement
The following actions and activities are not considered as eligible for funding under this call: … projects that started before 5 March 2024.
Component origin — The cost of components originating outside the EU and EDIP associated countries must not be higher than 35% of the estimated costs of the components of the product whose increase in production capacity is supported. No component may be sourced from third countries that contravene the security and defence interests of the EU and its Member States.
Design authority — Projects must retain full control over the definition, adaptation and evolution of the design of the defence products concerned, including the legal authority to substitute or remove components that are subject to restrictions imposed by non-associated third countries or by non-associated third-country entities.
Proposals must relate to activities taking place in the eligible countries (see above).
Please note that moreover, in EDIP, only infrastructure, facilities, assets and resources which are located or held in an eligible country may be used.
Projects should normally range between 36 and 60 months and project activities should normally be completed by 31 December 2033.
In het kort: ToegevoegdBekijkVerberg
Wie: Juridische entiteiten die gevestigd zijn in een EU-lidstaat of een met EDIP geassocieerd land, daar hun leidinggevende structuur hebben en niet onder zeggenschap staan van een niet-geassocieerd derde land. Zij kunnen alleen aanvragen of in een consortium van maximaal 15 juridische entiteiten.
Waarvoor: Het veiligstellen en uitbreiden van Europese productiecapaciteit voor defensieplatforms en eindproducten, zoals smeden en verspanen, belangrijke subsystemen, composietmaterialen, assemblage en integratie, manufacturing-as-a-service en ombouw van dual-use-industrie. Het doel is dat de Europese defensie-industrie sneller en meer defensieproducten kan leveren.
Wat je krijgt: Een lump sum op basis van het geschatte projectbudget tegen 35%, met bonussen tot 50% voor prioritaire acties. De gevraagde subsidie is maximaal € 30 miljoen per project en de projectomvang minimaal € 2 miljoen.
Wat je moet doen: Aanvragen via het Funding & Tenders Portal met een EU Login en een PIC-nummer, uiterlijk 16 februari 2027 om 17:00 uur Brusselse tijd, met onder meer een gedetailleerde begrotingstabel, eigendoms- en zeggenschapsverklaringen en een inkoopstrategie. De aanvragen worden beoordeeld en op score gerangschikt.
Toon 3 eerdere versiesToon minder
18 oktober 2026regeling · versie 3
Over de regeling: ToegevoegdBekijkVerberg
Projects are expected to deliver results aligned with the expected results set out in this call topic and to evidence their contribution through dedicated KPIs defined in the proposal. Expected results include: - tangible capacity increases in EU-based production enabling the ramp-up of the targeted platforms or end-products, with demonstrated contribution to competitiveness; - improved resilience & geographical distribution of supply and industrial capability, reducing single points of failure across forging/machining, key sub-systems, composites and assembly/integration; - strengthened availability and security of supply of the targeted platforms or end-products with identified risks and exposure to the risk of materialisation of conventional military threats; - and measurable lead-time reductions, establishment or availability of reserved capacity where applicable, and workforce trained to operate and sustain the reinforced production lines (including, where relevant, MaaS and dual-use conversion pathways).
15 oktober 2026regeling · versie 2
Cyclus: ToegevoegdBekijkVerberg
Indicatief: evaluatie februari-mei 2027, uitslag juni 2027, ondertekening subsidieovereenkomst september 2027 (call document, sectie 4).
Cumulatie: ToegevoegdBekijkVerberg
Geen dubbele financiering: een actie kan maar één subsidie uit de EU-begroting krijgen (behalve EU Synergies-acties) en kosten mogen nooit bij twee EU-subsidies worden gedeclareerd (call document, sectie 13).
Doelen: 4 nieuwBekijkVerberg
Meer productiecapaciteit in de EU Aantoonbaar meer productiecapaciteit in de EU voor het opschalen van de beoogde platforms of eindproducten, met een bijdrage aan het concurrentievermogen.
Veerkrachtige en gespreide toelevering Een veerkrachtiger en geografisch beter gespreide toelevering en industriële capaciteit, met minder single points of failure in smeden en verspanen, belangrijke subsystemen, composieten en assemblage en integratie.
Leveringszekerheid Betere beschikbaarheid en leveringszekerheid van de beoogde platforms of eindproducten, gezien de risico's van conventionele militaire dreigingen.
Kortere levertijden en opgeleid personeel Meetbaar kortere levertijden, waar van toepassing gereserveerde capaciteit, en personeel dat is opgeleid om de versterkte productielijnen te bedienen en te onderhouden (waar relevant ook MaaS en omschakeling van civiele productie).
7 oktober 2026regeling · versie 1 · eerste publicatie
Contact & bron
Start je EDF-EDIP-P-2027-LS-IRA-PE-aanvraag
in Twin.
Twin schrijft je aanvraag mee op basis van de regeling en je eigen projectdocumenten. Jij houdt de regie over elke tekst.