Naar de inhoud
OpenEDF-EDIP-P-2027-LS-IRA-KECECEenmalig

Key electronic components

Productiecapaciteit voor sleutelcomponenten van defensie-elektronica (EDIP).

EDIP-subsidie voor industriële versterking (lump sum, € 122,25 mln, maximaal € 20 mln per project, 35% met bonussen tot 50%) om in de EU productiecapaciteit voor sleutelcomponenten van defensie-elektronica op te bouwen, zoals geleidingselektronica.

Eerstvolgende deadline
87
dagen
16 februari 2027
EDF-EDIP-P-2027-LS-IRA-KEC
Bekijk alle deadlines
Bèta

Deze subsidiedatabase is in bèta

Tot de officiële lancering op 1 januari 2027 voeren we de laatste verbeteringen door. Onze redactie controleert elke regeling, maar gegevens kunnen nog onvolledig of verouderd zijn. Raadpleeg de officiële publicatie voordat je een aanvraag indient.

In het kort

Wat is Key electronic components?

Wie
Juridische entiteiten die gevestigd zijn in een EU-lidstaat of een met EDIP geassocieerd land, daar hun uitvoerend management hebben en niet onder zeggenschap staan van een niet-geassocieerd derde land. Zij kunnen alleen aanvragen of in een consortium van maximaal 15 juridische entiteiten.
section 6, Eligible participants; Consortium composition
Waarvoor
Het opschalen van de Europese productiecapaciteit voor kritieke elektronische componenten voor defensieproducten, zoals geleidings- en voortstuwingselektronica, RF- en lasermodules, camera's, avionica, printplaten en batterijen. Zo wordt de Europese defensie-industrie versterkt.
section 2, EDF-EDIP-P-2027-LS-IRA-KEC; section 6, Eligible actions and activities
Wat je krijgt
Een lump sum van maximaal € 20.000.000 per project, berekend met een financieringspercentage van 35% van het geschatte projectbudget; prioritaire acties kunnen met bonussen tot 50% komen. De totale subsidiabele kosten van het project zijn minimaal € 2.000.000.
section 6, Project budget; section 10, Form of grant, funding rate and maximum grant amount
Wat je moet doen
Aanvragen in één ronde via het Funding & Tenders Portal met een EU Login en een PIC-nummer, uiterlijk 16 februari 2027 om 17:00 uur Brusselse tijd, met onder meer de gedetailleerde begrotingstabel en de eigendoms- en zeggenschapsverklaringen. De voorstellen worden beoordeeld en op score gerangschikt.
section 4, 5 and 8

Opgebouwd uit de gegevens op deze pagina, zonder eigen toevoegingen.

Max per aanvraag
€ 20M
Gevraagde subsidie maximaal € 20 mln per project (calldocument sectie 6). Basispercentage 35%, met bonussen tot 50% voor prioritaire acties (sectie 10).
Consortium
Individueel of samen
Doel & impact

Waarom bestaat deze regeling?

De Europese defensie-industrie versterken door productiecapaciteit voor kritieke elektronische componenten op te schalen.

01
Meer productiecapaciteit in de EU
Aantoonbaar meer productiecapaciteit in de EU voor de beoogde componenten, met een bijdrage aan het concurrentievermogen.
02
Veerkrachtige en gespreide toelevering
Een veerkrachtiger en geografisch beter gespreide toelevering, met minder single points of failure.
03
Leveringszekerheid
Betere beschikbaarheid en leveringszekerheid voor de productielijnen van prioritaire defensieproducten, in verhouding tot de risico's van conventionele militaire dreigingen.
04
Kortere levertijden en opgeleid personeel
Meetbaar kortere levertijden, waar van toepassing gereserveerde capaciteit, en personeel dat is opgeleid om de versterkte productielijnen te bedienen en te onderhouden.
Beschrijving

Over de regeling

Samengesteld uit passages uit de bekendmaking van de regeling, zonder eigen toevoegingen.

Projects are expected to deliver results aligned with the expected results set out in this call topic and to evidence their contribution through dedicated KPIs defined in the proposal. Expected results include: - tangible capacity increases in EU-based production of the targeted electronic components, with demonstrated contribution to competitiveness; - improved resilience & geographical distribution of supply, reducing single points of failure; - and measurable lead-time reductions, establishment or availability of reserved capacity where applicable, and workforce trained to operate and sustain the reinforced production lines.

Lees verder

Proposals shall demonstrate the criticality of the targeted defence and associated production capacity, and justify the urgency of reinforcing availability and security of supply through the proposed industrial reinforcement activities.

Proposals shall set out an industrial reinforcement plan supported by a risk-management approach that addresses the identified risks and the measures to ensure availability and security of supply.

Kom ik in aanmerking?

Voorwaarden

Letterlijk uit de regeling, met het artikel waarin de voorwaarde staat.

01
Component origin — The cost of components originating outside the EU and EDIP associated countries must not be higher than 35% of the estimated costs of the components of the product whose increase in production capacity is supported. No component may be sourced from third countries that contravene the security and defence interests of the EU and its Member States.
02
Design authority — Projects must retain full control over the definition, adaptation and evolution of the design of the defence products concerned, including the legal authority to substitute or remove components that are subject to restrictions imposed by non-associated third countries or by non-associated third-country entities.
03
In order to be eligible, the applicants (beneficiaries and affiliated entities) must: … be established in one of the eligible countries, i.e.: … EU Member States (including overseas countries and territories (OCTs)) … non-EU countries: … listed EEA countries and countries associated to the EDIP Programme (‘EDIP associated countries’; list of participating countries)
04
In order to be eligible, the applicants (beneficiaries and affiliated entities) must: … have their executive management structure established in eligible countries
05
In order to be eligible, the applicants (beneficiaries and affiliated entities) must: … not be subject to control by a non-associated third country or non-associated third-country entity (unless they are exempted under Article 9(9) of the EDIP Regulation or provide guarantees, including adequate mitigation measures pursuant to a FDI screening, approved by the EU Member State or EDIP associated country where they are established; see Annex 2).
06
Please note that, in EDIP, associated partners must also comply with the above- listed conditions concerning establishment and control.
07
Single applicants or consortia may apply.
08
Consortia must not exceed 15 legal entities.
09
Proposals that include activities within the meaning of Article 12(1)(d) of the EDIP Regulation and where no SEAP participates must be submitted by consortia that are composed of at least 3 independent entities from 2 different EU Member States (only beneficiaries count; not affiliated entities).
10
Applications will only be considered eligible if their content corresponds wholly (or at least in part) to the topic description for which it is submitted.
11
The following actions and activities are not considered as eligible for funding under this call: … projects that do not implement the objectives set out in Article 4 of the EDIP Regulation
12
The following actions and activities are not considered as eligible for funding under this call: … projects that concern defence products which are prohibited by applicable international law
13
The following actions and activities are not considered as eligible for funding under this call: … projects that concern lethal autonomous weapons that operate outside a responsible chain of human command and control or that cannot be used in compliance with international humanitarian law
14
The following actions and activities are not considered as eligible for funding under this call: … projects related to cluster munitions or anti-personnel mines
15
The following actions and activities are not considered as eligible for funding under this call: … projects (or parts thereof), that are already fully financed from other public or private sources
16
The following actions and activities are not considered as eligible for funding under this call: … projects completed before the signature of the grant agreement
17
The following actions and activities are not considered as eligible for funding under this call: … projects that started before 5 March 2024.
18
Financial support to third parties (FSTP) is not allowed.
19
Proposals must relate to activities taking place in the eligible countries (see above).
20
in EDIP, only infrastructure, facilities, assets and resources which are located or held in an eligible country may be used.
21
Projects should normally range between 36 and 60 months and project activities should normally be completed by 31 December 2033.
22
Work packages dedicated to the reinforcement of the physical and cyber protection of the industrial capacity targeted by the action (if any; optional) are limited to a maximum EU contribution of EUR 500 000.
Bedrijfsgrootte
Alle groottes
Micro< 10 fte
Small< 50 fte
Medium< 250 fte
Large≥ 250 fte
Thema’s
Veiligheid, defensie en weerbaarheidInvesteren en bedrijfsmiddelen
Projectfase
Investering
Financieel

Wat krijg je?

35% van je subsidiabele projectkosten, met een maximum van € 20M per aanvraag.

Toelichting bij het maximum
Gevraagde subsidie maximaal € 20 mln per project (calldocument sectie 6). Basispercentage 35%, met bonussen tot 50% voor prioritaire acties (sectie 10).
Totaalbudget regeling
€ 122,3M · Indicatief topicbudget volgens de budgettabel van het calldocument (sectie 3); het portaal toont het callbudget van € 282,15 mln.
Budgetstand
Niet gepubliceerd door de bron
Hoeveel budget nog beschikbaar is, staat niet in de bronnen (gecheckt 20 november 2026).
Geen dubbele financiering: een actie kan maar één subsidie uit de EU-begroting krijgen (behalve EU Synergies-acties) en kosten mogen nooit bij twee EU-subsidies worden gedeclareerd (call document, sectie 13).
Type
Directe subsidie (niet terug te betalen)
Kalender

Deadlines & cycli

16
FEB
EDF-EDIP-P-2027-LS-IRA-KEC sluit 16 februari 2027
Open sinds 17 juni 2026
section 4, Timetable and deadlinesActief
Cyclus: Indicatief: evaluatie februari-mei 2027, uitslag juni 2027, ondertekening subsidieovereenkomst september 2027 (call document, sectie 4). section 4, Timetable and deadlines
Aanvraag

Hoe vraag je aan?

Vooraanmelding
Verplicht, vóór de volledige aanvraag
Verplichte bijlagen
  • Aanvraagformulier deel A: administratieve gegevens van de deelnemers en samengevatte begroting (online in te vullen)
  • Aanvraagformulier deel B: technische beschrijving van het project (max. 70 pagina's, niet-gerubriceerd en gerubriceerd deel samen)
  • Gedetailleerde begrotingstabel (basis voor de lump sum)
  • Informatie over de deelnemers (sleutelpersoneel en eerdere projecten of activiteiten)
  • Lijst van infrastructuur, faciliteiten, middelen en voorzieningen
  • Ownership control declarations (eigendoms- en zeggenschapsverklaringen), ook voor geassocieerde partners
  • Inkoopstrategie (in verband met de subsidiabiliteitsvoorwaarden over de herkomst van de kosten van componenten)
Werkwijze
Aanvragen via het Funding & Tenders Portal met een EU Login en een PIC-nummer; single-stage; deadline 17:00 uur Brusselse tijd; beheerd door European Commission, DG DEFIS.
Subsidiabele kosten

Waar mag het aan besteed worden?

Loonkosten
Niet subsidiabel
Materialen
Niet subsidiabel
Uitbesteding
Niet subsidiabel
Apparatuur
Niet subsidiabel
Grond
Niet subsidiabel
Gebouwen
Niet subsidiabel
Indirecte kosten
Niet subsidiabel
Reiskosten
Niet subsidiabel
Overige kosten
Lump sum: vaste bijdrage op basis van het geschatte projectbudget, geen kostenverantwoording.
Downloads

Bestanden & formulieren

Wijzigingen

Wat is er veranderd?

19 oktober 2026regeling · versie 4

Voorwaarden
Voorwaarden: 3 vervallen, 22 nieuwBekijk
Vervallen

Enkele aanvrager of consortium Enkele aanvragers of consortia van maximaal 15 juridische entiteiten; voor activiteiten onder artikel 12(1)(d) van de EDIP-verordening zonder SEAP minimaal 3 onafhankelijke entiteiten uit 2 lidstaten.

Gevestigd in EU of EDIP-geassocieerd land Aanvragers zijn juridische entiteiten gevestigd in een EU-lidstaat of geassocieerd land, niet gecontroleerd door niet-geassocieerde derde landen (calldocument sectie 6).

Beveiliging Gerubriceerde informatie en beveiligingsvoorschriften volgens het calldocument (sectie 6, Security).

Nieuw

Component origin — The cost of components originating outside the EU and EDIP associated countries must not be higher than 35% of the estimated costs of the components of the product whose increase in production capacity is supported. No component may be sourced from third countries that contravene the security and defence interests of the EU and its Member States.

Design authority — Projects must retain full control over the definition, adaptation and evolution of the design of the defence products concerned, including the legal authority to substitute or remove components that are subject to restrictions imposed by non-associated third countries or by non-associated third-country entities.

In order to be eligible, the applicants (beneficiaries and affiliated entities) must: … be established in one of the eligible countries, i.e.: … EU Member States (including overseas countries and territories (OCTs)) … non-EU countries: … listed EEA countries and countries associated to the EDIP Programme (‘EDIP associated countries’; list of participating countries)

In order to be eligible, the applicants (beneficiaries and affiliated entities) must: … have their executive management structure established in eligible countries

In order to be eligible, the applicants (beneficiaries and affiliated entities) must: … not be subject to control by a non-associated third country or non-associated third-country entity (unless they are exempted under Article 9(9) of the EDIP Regulation or provide guarantees, including adequate mitigation measures pursuant to a FDI screening, approved by the EU Member State or EDIP associated country where they are established; see Annex 2).

Please note that, in EDIP, associated partners must also comply with the above- listed conditions concerning establishment and control.

Single applicants or consortia may apply.

Consortia must not exceed 15 legal entities.

Proposals that include activities within the meaning of Article 12(1)(d) of the EDIP Regulation and where no SEAP participates must be submitted by consortia that are composed of at least 3 independent entities from 2 different EU Member States (only beneficiaries count; not affiliated entities).

Applications will only be considered eligible if their content corresponds wholly (or at least in part) to the topic description for which it is submitted.

The following actions and activities are not considered as eligible for funding under this call: … projects that do not implement the objectives set out in Article 4 of the EDIP Regulation

The following actions and activities are not considered as eligible for funding under this call: … projects that concern defence products which are prohibited by applicable international law

The following actions and activities are not considered as eligible for funding under this call: … projects that concern lethal autonomous weapons that operate outside a responsible chain of human command and control or that cannot be used in compliance with international humanitarian law

The following actions and activities are not considered as eligible for funding under this call: … projects related to cluster munitions or anti-personnel mines

The following actions and activities are not considered as eligible for funding under this call: … projects (or parts thereof), that are already fully financed from other public or private sources

The following actions and activities are not considered as eligible for funding under this call: … projects completed before the signature of the grant agreement

The following actions and activities are not considered as eligible for funding under this call: … projects that started before 5 March 2024.

Financial support to third parties (FSTP) is not allowed.

Proposals must relate to activities taking place in the eligible countries (see above).

in EDIP, only infrastructure, facilities, assets and resources which are located or held in an eligible country may be used.

Projects should normally range between 36 and 60 months and project activities should normally be completed by 31 December 2033.

Work packages dedicated to the reinforcement of the physical and cyber protection of the industrial capacity targeted by the action (if any; optional) are limited to a maximum EU contribution of EUR 500 000.

In het kort
In het kort: ToegevoegdBekijk
Nu

Wie: Juridische entiteiten die gevestigd zijn in een EU-lidstaat of een met EDIP geassocieerd land, daar hun uitvoerend management hebben en niet onder zeggenschap staan van een niet-geassocieerd derde land. Zij kunnen alleen aanvragen of in een consortium van maximaal 15 juridische entiteiten.

Waarvoor: Het opschalen van de Europese productiecapaciteit voor kritieke elektronische componenten voor defensieproducten, zoals geleidings- en voortstuwingselektronica, RF- en lasermodules, camera's, avionica, printplaten en batterijen. Zo wordt de Europese defensie-industrie versterkt.

Wat je krijgt: Een lump sum van maximaal € 20.000.000 per project, berekend met een financieringspercentage van 35% van het geschatte projectbudget; prioritaire acties kunnen met bonussen tot 50% komen. De totale subsidiabele kosten van het project zijn minimaal € 2.000.000.

Wat je moet doen: Aanvragen in één ronde via het Funding & Tenders Portal met een EU Login en een PIC-nummer, uiterlijk 16 februari 2027 om 17:00 uur Brusselse tijd, met onder meer de gedetailleerde begrotingstabel en de eigendoms- en zeggenschapsverklaringen. De voorstellen worden beoordeeld en op score gerangschikt.

Toon 3 eerdere versies

18 oktober 2026regeling · versie 3

Over de regeling
Over de regeling: ToegevoegdBekijk
Nu

Projects are expected to deliver results aligned with the expected results set out in this call topic and to evidence their contribution through dedicated KPIs defined in the proposal. Expected results include: - tangible capacity increases in EU-based production of the targeted electronic components, with demonstrated contribution to competitiveness; - improved resilience & geographical distribution of supply, reducing single points of failure; - and measurable lead-time reductions, establishment or availability of reserved capacity where applicable, and workforce trained to operate and sustain the reinforced production lines. Proposals shall demonstrate the criticality of the targeted defence and associated production capacity, and justify the urgency of reinforcing availability and security of supply through the proposed industrial reinforcement activities. Proposals shall set out an industrial reinforcement plan supported by a risk-management approach that addresses the identified risks and the measures to ensure availability and security of supply.

15 oktober 2026regeling · versie 2

Cyclus
Cyclus: ToegevoegdBekijk
Nu

Indicatief: evaluatie februari-mei 2027, uitslag juni 2027, ondertekening subsidieovereenkomst september 2027 (call document, sectie 4).

Minimum projectkosten
Toegevoegd: € 2.000.000
Cumulatie
Cumulatie: ToegevoegdBekijk
Nu

Geen dubbele financiering: een actie kan maar één subsidie uit de EU-begroting krijgen (behalve EU Synergies-acties) en kosten mogen nooit bij twee EU-subsidies worden gedeclareerd (call document, sectie 13).

Zoekwoorden
Toegevoegd: defensie-elektronica, defensie-industrie, EDF-EDIP-P-2027-LS-IRA-KEC, EDIP, elektronische componenten, Europees defensie-industrieprogramma, productiecapaciteit
Verplichte bijlagen
Toegevoegd: Aanvraagformulier deel A: administratieve gegevens van de deelnemers en samengevatte begroting (online in te vullen); Aanvraagformulier deel B: technische beschrijving van het project (max. 70 pagina's, niet-gerubriceerd en gerubriceerd deel samen); Gedetailleerde begrotingstabel (basis voor de lump sum); Informatie over de deelnemers (sleutelpersoneel en eerdere projecten of activiteiten); Lijst van infrastructuur, faciliteiten, middelen en voorzieningen; Ownership control declarations (eigendoms- en zeggenschapsverklaringen), ook voor geassocieerde partners; Inkoopstrategie (in verband met de subsidiabiliteitsvoorwaarden over de herkomst van de kosten van componenten)
Doelen
Doelen: 4 nieuwBekijk
Nieuw

Meer productiecapaciteit in de EU Aantoonbaar meer productiecapaciteit in de EU voor de beoogde componenten, met een bijdrage aan het concurrentievermogen.

Veerkrachtige en gespreide toelevering Een veerkrachtiger en geografisch beter gespreide toelevering, met minder single points of failure.

Leveringszekerheid Betere beschikbaarheid en leveringszekerheid voor de productielijnen van prioritaire defensieproducten, in verhouding tot de risico's van conventionele militaire dreigingen.

Kortere levertijden en opgeleid personeel Meetbaar kortere levertijden, waar van toepassing gereserveerde capaciteit, en personeel dat is opgeleid om de versterkte productielijnen te bedienen en te onderhouden.

7 oktober 2026regeling · versie 1 · eerste publicatie

Bron

Contact & bron

Verstrekker
European Commission
Laatst geverifieerd
20 november 2026 door Twin-redactie
Begin je aanvraag

Start je EDF-EDIP-P-2027-LS-IRA-KEC-aanvraag
in Twin.

Twin schrijft je aanvraag mee op basis van de regeling en je eigen projectdocumenten. Jij houdt de regie over elke tekst.